2.Main Features of block molding with vacuum
1.Machine structure:
a, The wall panel making machine or panel are welded by strong rectangle tube and steel plate make high strength to keep
more safety of the machine;
b, All block mold frames are treated by heat-treatment to release the welding stress, so that the frames would not deformed;
c, After heating treatment, all mold frames are processed by sand blasting treatment to keep the rust away, then under coat and finishing coat are greatly improved anticorrosion performance and long life;
d, Adopts three Germany gauges and safety valve for multi-safety protection. The machine will be tested by water pressure and steam (many steps), ensure the machine more stable and safety.
2.Steam system:Three ball valves, comparing one big steam valve, saves 20% steam, with ISOstandard butterfly valves, greatly improve stability and long life;
3.Control system:a, Adopts PLC( Mitsubishi) and touch screen ( Schneider) for an easy operation;b, Equipped material level sensor to control the filling. The block cooling is controlled by foam pressure sensor, The whole procedure for filling, heating, cooling will be automatically by PLC.
 CE certificate, ISO9001:2008
SPB200-800DZ Block Molding Machine with Vacuum (Typical) | ||||||
Item | Â | SPB200/DZ | SPB300/DZ | SPB400/DZ/ | SPB600/DZ | SPB800/DZ |
Mould Cavity Size |
 | 2040*1240 *1030(mm) |
3060*1240 *1030(mm) |
4080*1240 *1030(mm) |
6100*1240 *1030(mm) |
8120*1240 *1030(mm) |
Block Size |
 | 2000*1200 *1000(mm) |
3000*1200 *1000(mm) |
4000*1200 *1000(mm) |
6000*1200 *1000(mm) |
8000*1200 *1000(mm) |
Steam | Entry Consumption Pressure |
DN65 30-50kg/cycle 0.8MPa |
DN65 50-70kg/cycle 0.8MPa |
DN100 60-90kg/cycle 0.8MPa |
DN100 100-130kg/cycle 0.8MPa |
DN150 120-170kg/cycle 0.8MPa |
Compressed Air |
Entry Consumption Pressure |
DN40 1.5-2m3/cycle 0.6MPa |
DN40 1.8-2.2m3/cycle 0.6MPa |
DN40 2-2.5m3/cycle 0.6MPa |
DN40 2-3m3/cycle 0.6MPa |
DN40 2.5-3m3/cycle 0.6MPa |
Cooling Water |
Entry Consumption Pressure |
DN50 0.4 m3/ cycle 0.4-0.6MPa |
DN50 0.6 m3/ cycle 0.4-0.6MPa |
DN50 0.6 m3/ cycle 0.4-0.6MPa |
DN50 0.6-1 m3/ cycle 0.4-0.6MPa |
DN50 0.8-1.2m3/ cycle 0.4-0.6MPa |
Drainage | Vacuum drain Steam vent Condensate |
φ125mm φ00mm φ100mm |
φ125mm φ100mm φ100mm |
φ125mm φ200mm φ100mm |
φ125mm φ200mm φ100mm |
φ125mm φ200mm φ100mm |
Throughput | 15kg/m3 | 5min/cycle | 6min/cycle | 7min/cycle | 8min/cycle | 8min/cycle |
Connected Load |
 | 20.5-24.5KW | 20.5-24.5KW | 24.5-35.5KW | 24.5-35.5KW | 35.5-43.5KW |
Overall Dimension |
(L*W*H) | 5700*4000 *2850(mm) |
7200*4500 *3000(mm) |
11000*4500 *3300(mm) |
12600*3960 *2906(mm) |
15700*4600 *3400(mm) |
Weight | Â | 6000kg | 7200kg | 12000kg | 15000kg | 18500kg |
Room Height Required |
 | 6000mm | 6000mm | 6000mm | 6000mm | 6000mm |
Vote: We custom make machines according to customer's requirement |
4.Application of block molding with vacuum
The fuselage of the machine adopts C-shaped steel plate to weld the fuselage. The equipment is easy to operate and stable in operation. The die change adopts the block cylinder method, and the die change is accurate and reliable. The main components of hydraulic, pneumatic and electrical products are all international brands, which further improves the reliability of the equipment.
CNC Steel Plate Punching Marking Drilling Machine
Punching Machine,Marking Machine,Drilling Machine
Shandong XingTian Sunshine Intelligent Equipment Co., Ltd. , https://www.cnsunshinecnc.com