1, The MD-3500 curve PCB depaneling machine is developed and produced by our company. It is a device that divides multi-connected PCB according to programming path by using high-speed rotary milling cutter. Widely used in digital, communication, lighting and other fields. Improve the slabs of manual fascia, V-CUT, punching, etc, improve quality and reduce scrap.
2, The MD-3500 curve PCB depaneling machine adopts negative pressure down-suction structure. The suction outlet is located under the carrier fixture to make a negative pressure inside the fixture, and the dust generated when the cutting board is easily removed. The drum type dust removal structure is built in the bottom of the machine, which perfectly solves the dust trouble of the cutting board, achieves small space and low noise production, and energy consumption is less than 1/2 of the same equipment, saving the limited production space of the workshop. The dual-table servo control system has extremely high stability and cutting precision of ±0.01mm, which meets various cutting requirements and guarantees production quality.
3, The system of MD-3500 curve PCB depaneling machine is a self-developed control system. The operation interface is user-friendly and the software if free for life. Teaching-style programming, Short time for changing line, improve production efficiency. A person with a certain computer operation basis can operate the machine independently with simple training.
Machine features
1, Using down-suction mode, the dust collection effect is good by adopting the theory of free falling body.Â
2, The subsrate is fixed more firmly in the cutting to avoid the cutting precision error caused by poor basic positioning.
3, Special jig making, easy to fix products to be cut, ensuring high-precision cutting requirements.
4, When cutting, the anti-static generator is attached to the front section of the spindle to continuously blow air, which reduces static electricity generated when the high-speed spindle is cut, and can avoid damage caused by static electricity.
5, Use safety doors to reduce noise and dust and improve safety
6, The cleaner is equipped with a dust box (which can be scheduled for maintenance according to the capacity cutting requirements or dust collection time).
Technical Parameters
Machine Repeatability | ±0.01mm |
X, Y, Z control mode | Use sports and PC |
X, Y, Z drive mode | Panasonic servo motor |
Man-machine operation and data storage | PLC system |
Cutting accuracy | ±0.02mm |
Main shaft speed | MAX60000rpm |
Machine voltage | 220V / 50Hz |
Narrow pressure supply | More than 4.5kg/cm2 |
Power consumption | 6KVA |
Suction mode | Lower dust collection |
cleaner size | L930*W550*H470mm |
cleaner voltage | 400VÂ / 50Hz |
Machine dimension | L1380*W1250*H1875mm |
Working size | L330*W350mm(double table-board) |
Weight | About 700KG |
If you need more further details about our machines,  please feel free to contact us .
 Product description
1, The MD-3500 curve PCB depaneling machine is developed and produced by our company. It is a device that divides multi-connected PCB according to programming path by using high-speed rotary milling cutter. Widely used in digital, communication, lighting and other fields. Improve the slabs of manual fascia, V-CUT, punching, etc, improve quality and reduce scrap.
2, The MD-3500 curve PCB depaneling machine adopts negative pressure down-suction structure. The suction outlet is located under the carrier fixture to make a negative pressure inside the fixture, and the dust generated when the cutting board is easily removed. The drum type dust removal structure is built in the bottom of the machine, which perfectly solves the dust trouble of the cutting board, achieves small space and low noise production, and energy consumption is less than 1/2 of the same equipment, saving the limited production space of the workshop. The dual-table servo control system has extremely high stability and cutting precision of ±0.01mm, which meets various cutting requirements and guarantees production quality.
3, The system of MD-3500 curve PCB depaneling machine is a self-developed control system. The operation interface is user-friendly and the software if free for life. Teaching-style programming, Short time for changing line, improve production efficiency. A person with a certain computer operation basis can operate the machine independently with simple training.
Machine features
1, Using down-suction mode, the dust collection effect is good by adopting the theory of free falling body.Â
2, The subsrate is fixed more firmly in the cutting to avoid the cutting precision error caused by poor basic positioning.
3, Special jig making, easy to fix products to be cut, ensuring high-precision cutting requirements.
4, When cutting, the anti-static generator is attached to the front section of the spindle to continuously blow air, which reduces static electricity generated when the high-speed spindle is cut, and can avoid damage caused by static electricity.
5, Use safety doors to reduce noise and dust and improve safety
6, The cleaner is equipped with a dust box (which can be scheduled for maintenance according to the capacity cutting requirements or dust collection time).
Technical Parameters
Machine Repeatability | ±0.01mm |
X, Y, Z control mode | Use sports and PC |
X, Y, Z drive mode | Panasonic servo motor |
Man-machine operation and data storage | PLC system |
Cutting accuracy | ±0.02mm |
Main shaft speed | MAX60000rpm |
Machine voltage | 220V / 50Hz |
Narrow pressure supply | More than 4.5kg/cm2 |
Power consumption | 6KVA |
Suction mode | Lower dust collection |
cleaner size | L930*W550*H470mm |
cleaner voltage | 400VÂ / 50Hz |
Machine dimension | L1380*W1250*H1875mm |
Working size | L330*W350mm(double table-board) |
Weight | About 700KG |
If you need more further details about our machines,  please feel free to contact us .
Â
PTO Vane Pump is been used to transporting diesel fuel oil, gasoline, kerosene etc Inflammable and explosive liquid. Sliding vane pump, its working principle is sliding vane in a slot in the rotor and rotor eccentricity on pump body, rotor turns, sliding vane sliding out inside the rotor, close to the sliding surface of the pump body, rotor, vane, pump body cavity is formed by the rotation of the rotor, the dimensional size of periodic change, cavity increases, breathing in medium, cavity become hour, discharge medium, the cycle, complete medium conveying process.
pump can used on tanker truck unloading oil, and also can be used to circulation oil and transporting oil.
PTO Vane Pump
PTO Vane Pump,PTO Vane Sliding Pump,Tank Truck Vane Pump,PTO Fuel Vane Pump
Botou Honghai Pump Co.,Ltd , https://www.gearpump.nl