1.      Specification of rolling material: Width: 480mm; Thickness:3-4mm;        Q235A Galvanized steel sheet.
2.      Working speed: 10 -12m/min
3.      Roller steps: 13 pairs main rollers & 7 pairs flattening rollers
4.      Material of roller: GCr15 bearing steel, quenched, HRC58°-62°
5.      Material of main shaft: superior 45# steel, tempered.
6.      Diameter of main shaft: ¢85 mm
7.      Main motor power: 35 kw
8.      Transmission:double-row chain drive
9.      Structure of forming machine: wallboard
10.    Flattening motor power: 2.2 kw
11.    Hydraulic motor power: 11 kw, Pressure: 20 Mpa
12.    Material of Punching and Cutting mould:Cr12
13.    Cutting blade heat-treated.:HRC58°-62°
14.    Punching and Cutting Way:Adopt hydraulic driving, flat panel punching, cutting after roll forming.
15.    Electric control system: whole machine adopts PLC frequency control, Cut-to-length error≤±2mm
16.  Machine dimension:13500mm×2700mm×1600mm
Equipment configuration
| Manual Feeding device (3 T capacity) |
| transmission |
| flattening device |
| before-punching device (2 sets) |
| main machine and roller (including guide table) |
| cutting (after roll forming) device, hydraulic system |
| electric control system |
| run out table |
Wide Usage: Moving houses with all your worldly possessions in your truck, taking your motorcycle along with you on a family camping trip, tying down farm machines to help your neighbor work his property,securing cargo pallets and boxes for deliveries.
Different hooks used: The wire double J hooks on these tiedown straps can be inserted into Etrack rings and hooks, recessed D ring pan fittings, bolt-on and welded D-rings,chain anchors,and other cargo anchors.
Premium Materials: heavy duty ratchet straps with aluminum handle are made out of superior, DURABLE polyester webbing that won`t tear or stretch,can withstand UV rays,and won`t fall apart when wet.The workmanship is precise and reliable.
Working Load And Breaking Strength: Premium material to keep 27 feet long and 2 inches wide ratchet straps from breaking and make it have 10,000lb break strength and 3,333lb working capacity.
How to Use: Open the ratchet by pressing the lever on the handle and lifting the handle. Slide the loose strap end through the bar on the handle and fold it over. Insert the double steel J hook end fittings into cargo tie-down anchors. Pull the slack strap all the way through and pump the ratchet to tighten the strap as much as possible.
E Track Straps,Soft Loop Tie Down Straps,Heavy Duty Tie Down Straps,Black Ratchet Straps,Rope Ratchet Tie Down
WINNERLIFTING SAFETY EQUIPMENT CO., LTD. , https://www.ratchetstrapfactory.com