Why Use Smart Electricity Safety Management System

Why to adopt intelligent electricity safety management system and how to realize smart monitoring with electricity security?

Many people do not understand why they need to set up a smart electricity safety management system, especially for places where fire alarm systems have already been set up, why do they need to set up a smart electricity safety management system?

This article explains the importance of smart power security management systems and proposes a general solution for smart power security management systems.

The Significance of Installation and Application of Intelligent Electrical Fire Monitoring System

The use of electrical fire monitoring systems can greatly reduce the occurrence of fire and avoid losses. Using this monitoring system can fundamentally prevent fires and has the following positive significance:

One: system operation

The entire power system can be monitored through an electrical fire monitoring system, allowing the system to operate with a very dynamic and intuitive observation of the network diagram, which facilitates the refresh of the operating parameters of the electrical equipment and the current state of use. If the conditions are normal, then fire and fire can be avoided. The accident happens, of course, also supports the function of on-site and remote assistance control, convenient handling and practicality, so that the actual situation can be dynamically monitored to ensure the monitoring system data accuracy and refresh rate.

II: Analysis of power consumption

The most important thing for electrical equipment is the analysis of electrical energy consumption. The use of electrical fire monitoring systems is a clear understanding of the quality and consumption of electrical energy throughout the entire monitoring range. It can also be used to understand whether there are unexpected conditions such as leakage or temperature instability. Real-time monitoring of the situation, the maximum degree of understanding of the power consumption, at the same time for power and other related factors, but also have a good understanding, can be used as a basis for judging the fault and the standard.

III: Prevention of Electrical Fire

Of course, the prevention of electrical fire is the greatest use of electrical fire monitoring systems. Continuous monitoring of voltage and current of electrical equipment and changes in temperature of the power connector, etc., if within the normal range, there is no need to worry, if any, monitoring Alarms will appear in the system, and will continue to provide preventive maintenance for the distribution equipment to reduce the incidence of electrical fires, get very good preventive functions, to ensure the safety of the user's life and property, so that the prevention effect is very obvious.

Four: Alarm and Intelligent Management

The entire power system can be monitored through an electrical fire monitoring system, allowing the system to operate with a very dynamic and intuitive observation of the network diagram, which facilitates the refresh of the operating parameters of the electrical equipment and the current state of use. If the conditions are normal, then fire and fire can be avoided. The accident happens, of course, also supports the function of on-site and remote assistance control, convenient handling and practicality, so that the actual situation can be dynamically monitored to ensure the monitoring system data accuracy and refresh rate.

Smart Electrical Safety Management System Installation and Application Requirements

First, the monitoring part of the electrical fire monitoring system should be installed in the power distribution room or distribution box. The control part should be installed in the unit fire control room. The unit that does not have a fire control room should be installed in a staffed place. In places where no fire control room is provided, electrical fire monitoring detectors shall transmit the alarm signal to a place where people are on duty.

Second, the electrical fire monitoring system should be based on the nature of the building and electrical fire hazard settings, and determine the form and installation location of the electrical fire monitor based on the electrical line laying and the specific conditions of the electrical equipment. When there is no fire control room and the number of electrical fire detectors is not more than eight, an independent electrical monitoring detector can be used.

Thirdly, in the place where the fire control room is set up, the fire alarm information and fault information of the electric fire monitor should be displayed on the fire control room graphic display device or the fire alarm controller that controls the centralized control function, but this type of information and fire alarm information are The display should be different.

Four smart electricity safety management systems can communicate with smart electricity cloud platforms. The data collected by the smart electricity security detectors is connected to the smart electricity and fire IoT platform through the Internet of Things, and can be separately supervised by the Internet of Things platform. The risk of fire occurrence can be timely and effectively determined by using smart pc client or mobile app to minimize the risk of fire.