The difference between the speed gate and the swing gate

The pedestrian passage speed gate and swing gate are the gates for the management personnel to pass through, and they all rely on the swing arm to complete their functions. To be more careful, the speed gate is an upgraded version of the swing gate, and the following follows the small series from the appearance. , the movement structure, product performance and other aspects to see the difference between the speed gate and the swing gate.

The difference between the swing gate and the speed gate

In many residential areas, office buildings can be seen. The setting of the swing gate is mainly for the convenience of bicycles, electric vehicles, motorcycles, etc. The appearance of the swing gate is usually 280mm for single movement, 300mm for double movement, and dot matrix. The indicator light and the swing arm are made of 304 stainless steel. There are also some plexiglass, and the swing gates all look heavy. However, the speed through the door to view, contrasting slender, looks light, rich feeling, the movement structure is small, the single movement is usually 150mm wide, the double movement is usually 210mm, the length is 1500mm, the length can be determined according to the customer. The card window is slender and the indicator light is smaller. The swing arm is basically plexiglass or tempered glass. The swing arm drive rod is thicker and has a diameter of 51-63mm. From the outside, the manufacturing technology and the overall shape are high-end and atmospheric.

From the appearance, you can feel the difference between them, and the speed gate is huge.

Speed ​​gate and swing gate movement difference

The swinging brake core adopts sliding friction, four-wheel four-slot principle, low transmission power, positioning by wheel and slot 90°. Each time the swing arm swings, the sheave will slide and rub once, and the positioning is also based on dead tissue positioning. If you encounter an external force and do not add anti-collision equipment, directly hit the movement or the swing arm. If the arm swings against the center zero position, the two ends are not aligned, not synchronized, but the movement cannot operate normally, and the swing arm is bent. The motor is equipped with a brush motor. It can only be alarmed if it is illegally inserted, and it cannot be locked.

The Nikon high-speed door movement uses the solenoid valve clutch and the encoder to operate in conjunction. The motor drive power is high, that is, the transmission coefficient is large, and the maximum limit of the effective power of the motor is transmitted to the swing arm. The motor can be a brushless motor or a servo motor. When the brush motor is selected, the swing arm violates the zero position when the external force effect is encountered. The solenoid valve immediately locks the brake and eliminates the external force. The encoder effect commands the swing arm to return to the zero position, which constitutes an active reset, and is illegally braked. The valve will also lock immediately, and there will be an alarm prompt, prompting to swipe the card.

The swing gate movement and the speed-pass door movement are different, one has no friction and has a long service life, one has a short sliding friction service life, and the kinetic energy conversion power is different, so the speed-passing door has an essential difference between the movement and the swing gate. In the future, Nikomai will vigorously develop various series of speed-passing doors to get used to the needs of the times. It is necessary to walk in front of the industry and gradually screen the general swing gates.

The difference between swing gate and speed gate

Generally, the swing gate is not anti-collision, the kick will definitely be bad, and the movement will be severely damaged. The other control panels are treated with 8-bit single-chip microcomputer. The opening speed is relatively slow, the traffic is 20-25 people/minute, and the power-off gate is retracted. In line with the fire protection request, there is no fire linkage function. Generally, the swing gate and the trunk can only be handled by the central anti-pinch. If there is a pass, the peak period can only be one person and one card, and cannot be swiped in succession or recall. Open the gate and so on.

Nicomai speed-passing door has anti-collision function, and it can actively reset with one foot. In addition, some 32-bit embedded microprocessors are used for control. The opening speed is very fast, 0.4-0.5 seconds/time, and 35-40 people/passage. Minutes, the card can be swiped in succession, the gates are opened in succession, the gates have memories, and the fire is linked.

The intelligent operation of the speed-pass door can know that when the person and the baggage (backpack or trolley case) pass the gate, the speed-pass door card will open quickly after the card is opened, the baggage will not pass, the gate will not close, and the baggage (trailer box) will be waiting. After thorough passage, the gate starts to close, if there is someone in the process of closing the gate, the gate is actively opened, the safety factor is very high, when the peak period of the commute passes the peak period of the scenic spot, only the card is recorded, the gate Will not close the gate, improve the ability to pass, there are also tour groups crossing the gate, the number of cards and the number of people just flat. The synchronization between the two ends is good, and the gates are opened together. The speed control door has good handling, just like the human brain, fast, sensitive and stable.

The above is the difference between the swing gate and the speed gate. For more information, please click on the product information to learn more. For more detailed product information, please click the product center to view.