1, various types and choices of car wax

At present, there are both solids and liquids, as well as home-made and import-selected domestic and import options. Due to the different performance of various waxes, their effects are not the same. Therefore, care must be taken when selecting them. Improper selection not only does not protect the body, but also discolors the paint. Under normal circumstances, it should be based on the characteristics of car wax, the newness of the vehicle, paint color and driving environment and other factors. For limousines, high-grade car wax can be used; the new car is best coated with color wax to protect the body's luster and color; the summer should use anti-ultraviolet vehicle wax; when the driving environment is poor, it is more appropriate to use protective resin wax ; And for ordinary vehicles, use regular pearl or metallic paint series car wax. Of course, the choice of car wax must also be considered when adapting to the color of the car paint. Generally, dark car paint uses car wax of black, red and green series, and light car paint uses silver, white and pearl car wax.

2, car waxing matters needing attention

(1) The new car should not be waxed. It is not enough to wax a vehicle after someone buys a new one. Since the new car itself has a layer of protective wax on the paint layer, premature waxing will remove the original wax on the surface of the new car, causing unnecessary waste. Generally, the new car does not need to rush to wax within five months of buying back.

(2) To master the waxing frequency. The time interval for waxing should also be different due to the environment in which the vehicle is driving and the parking place. Generally, there are garages for parking, and vehicles that are mostly on good roads are used for waxing once every 3-4 months. For vehicles parked in the open air, it is best to apply wax every 2-3 months due to wind and rain. Of course, this is not a rigid rule. When the body is generally not touched by hand, it can be waxed again.

(3) Before the waxing, it is best to use the car wash water to clean the dirt and dust on the exterior of the body. Remember not to use detergent and soapy water blindly, as the sodium chloride ingredients contained in it will attack the paintwork, wax film and rubber parts of the car, which will make the car paint lose luster and the rubber parts will age. If there is no special car wash water, the vehicle can be washed with clean water and the car body can be wiped dry and then waxed.

(4) The car should be waxed in a cool place to ensure that the car body does not become hot. Because with the increase of temperature, the adhesion of car wax becomes worse, which will affect the waxing quality.

(5) When waxing, apply a proper amount of car wax to the sponge block and apply it on the vehicle body in a straight line. Do not pour the wax liquid on the car or paint it in a circle. A job should be completed in a row. Do not apply it. Stop; general wax layer smeared after 5-10min with a new towel to polish, but fast car wax should be coated and polished.

(6) After the car body is waxed, some car wax will remain in the gaps between the lights, license plates, doors and luggage compartments, making the car body look unattractive. Wax scales in these areas may rust if not cleaned in time. Therefore, be sure to thoroughly clean the wax after you finish the wax so that you can get a perfect waxing effect.

Titanium Dioxide(TIO2)

Titanium dioxide is an important inorganic chemical pigment, the main component is titanium dioxide. The production process of titanium dioxide has two process routes: sulfuric acid method and chloride method. It has important applications in coatings, inks, papermaking, plastics and rubber, chemical fiber, ceramics and other industries.

It has two types: rutile type (Rutile R type) and anatase type (Anatase A type). The rutile crystal structure is compact, relatively stable, and has low optical activity, so it has good weather resistance, and has high hiding power and decolorizing power.

Titanium dioxide is widely used in coatings, plastics, rubber, ink, paper, chemical fiber, ceramics, daily chemicals, medicine, food and other industries.
The coating industry is the largest user of titanium dioxide, especially Rutile Titanium Dioxide, most of which is consumed by the coating industry. The paint made of titanium dioxide has bright colors, high hiding power, strong tinting power, low dosage, and many varieties. It can protect the stability of the medium, and can enhance the mechanical strength and adhesion of the paint film to prevent cracks. Prevent the penetration of ultraviolet rays and moisture, and extend the life of the paint film.
The plastics industry is the second largest user. Adding titanium dioxide to plastics can improve the heat resistance, light resistance, and weather resistance of plastic products, improve the physical and chemical properties of plastic products, enhance the mechanical strength of the products, and extend the service life.
The paper industry is the third largest user of titanium dioxide. As a paper filler, it is mainly used in high-grade paper and thin paper. Adding titanium dioxide to the paper can make the paper have better whiteness, good gloss, high strength, thin and smooth, no penetration during printing, and light weight. Titanium dioxide for papermaking generally uses Anatase Titanium Dioxide without surface treatment, which can act as a fluorescent whitening agent and increase the whiteness of paper. However, laminated paper requires the use of surface-treated rutile titanium dioxide to meet the requirements of light resistance and heat resistance.
Titanium dioxide is also an indispensable white pigment in advanced inks. The ink containing titanium dioxide is durable and does not change color, has good surface wettability and is easy to disperse. The titanium dioxide used in the ink industry has rutile type and anatase type.
The textile and chemical fiber industry is another important application field of titanium dioxide. Titanium dioxide for chemical fiber is mainly used as a matting agent. Since the anatase type is softer than the gold red type, the anatase type is generally used. Titanium dioxide for chemical fiber generally does not require surface treatment, but in order to reduce the photochemical effect of titanium dioxide and prevent the fiber from degrading under the action of titanium dioxide photocatalysis, surface treatment is required for some special varieties.
The enamel industry is an important application field of titanium dioxide. The enamel grade titanium dioxide has high purity, good whiteness, fresh color, uniform particle size, strong refractive index and high color reducing power, and has strong turbidity and Opacity, make the coating thin, smooth and strong acid resistance after enamelling. It can be evenly mixed with other materials in the enamel manufacturing process, does not agglomerate, and is easy to melt.
The ceramic industry is also an important application field of titanium dioxide. Ceramic grade titanium dioxide has high purity, uniform particle size, high refractive index, excellent high temperature resistance, and does not change ash at 1200°C for 1 hour. High opacity, thin coating, light weight, widely used in ceramics, construction, decoration and other materials.

Titanium Dioxide,Tio2 Titanium Dioxide,Titanium Dioxide Tio2,Titanium Dioxide Rutile Tio2

Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com