The more simple and easy to understand the product, the more attention it has to pay attention to. Many of the seemingly faulty issues are caused by the lack of regular maintenance of the temperature bath.
   For a constant-temperature circulating water tank factory, there will be a small amount of impurities in the water. The general temperature is set at 20 °C. It is particularly suitable for the growth and reproduction of microorganisms. After a long time, these microorganisms will clog the water filter to cause backwater. Poor, the pump will have a loud noise. The microorganisms attached to the surface of the heat exchanger cause the heat transfer effect of the heat exchanger to deteriorate and the cooling capacity to become smaller. In addition, the electric power of the water circulation of the water tank and the heat removed by the refrigerant from the load need to be excluded from the radiator at the front air hood. If the front air hood is filled with dust, cotton, etc. will hinder the dissipation of these heat for a long time, the cooling effect will be A substantial reduction, if not cleared, can easily lead to instrument burnout due to electric heat. When the relative humidity in the environment is too high, the relative humidity in the air is too high, and the water pump, the water pipe connector, and the external water pipe in the water circulation waterway are likely to be dew-condensed, and when they accumulate much, they will drop to the ground. Lowering the room temperature or dehumidifying can prevent dew.
Therefore, we must strictly follow the requirements in the manual and do regular maintenance work.
??
This classification mainly includes the aluminum low-pressure casting Machinery Parts using in motor area.
Normal raw material: A356.ZL101A.ZL101.AlSi7Mg
The pressure on the surface of the molten metal is 0.06~0.12Mpa.This processing has good shrinkage, casting tissue is dense, easy to produce the large thin-walled complex parts, the casting head is not needed , metal yield can be up to 95%.
Product Dimensions: Customized
Casting General Tolerance: Grade GBT6414-CT8
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Machinery Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo
Aluminum Low-Pressure Motor Parts,Al Low-Pressure Casting Motor Parts,Low-Pressure Casting Motor Parts
NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.bolangautoparts.com