GB/T26831 "Community energy metering and copying system specification" is proposed by the China Federation of Machinery Industry and is under the jurisdiction of the National Electrical Instrument Standardization Technical Committee (SAC/TC104). The standard was promulgated and implemented in 2011 and contains a total of six parts - Part 1: Data exchange; Part 2: Physical layer and link layer; Part 3: Application-specific layer; Part 4: Wireless reading of instruments; Part 5: Wireless Relaying; Part 6: Local Bus.
The first part of the standard specifies the data exchange and communication for meter and remote meter reading using a common method. The purpose is to provide a protocol specification for the application layer of the meter.
Part 4 and Part 5 of the standard deal with wireless metering (water, electricity, gas, heat) wireless metering specifications. The modifications of Part 4 and Part 5 were made in conjunction with the technical status of domestic wireless meter reading and the related national wireless communication standards. Participating drafting organizations included Ningbo Water Meter, Harbin Institute of Electrical Instrumentation, Qingdao Dongsoft Computer Technology Co., Ltd., and Xi'an Yuqi. Electronics Co., Ltd., participated in the drafting of Hu Yajun, Guo Yonglin, Liu Yongsheng, Li Wanhong, Hou Xuewei, Ni Zhijun and so on.
As shown in the standard, Part 4 specifies the physical layer and link layer parameter requirements for the remote wireless meter reading system, focusing on the use of "short-range devices" that use license-free 433-434 MHz wireless civil bands ( SRD) covers portable devices, removable devices, and fixed devices. The fifth part is mainly used to support meter reading of wireless routing networks. The formulation and implementation of this standard system will help promote the technical progress and healthy development of the water meter industry.
Wuxi Yuda Polyethylene Welder can meet ISO21307 welding standard. There is a need to examine current practice on a global scale and establish the best procedure(s) for the highest-quality, most reliable and efficient construction of PE butt fusion systems for gas and water distribution.
There are 3 following types of butt fusion welders to meet the standard ISO 21307 : 1. Single Low Pressure Fusion Jointing Welding Machines 2. Double low-pressure Fusion Welders 3. Sigle High Pressure Plastik Welding Equipment. As shown in the graphs of the various systems, the high pressure method of butt welding takes less time to make a weld than low pressure welding fusion. This is a very important factor in lowering the cost of installation, since the cycle times necessary for butt welding large diameter pipes are long. Using the high pressure poly welders means that daily productivity can be significantly increased. Here you can choose relevant SHP series high pressure hdpe welding machines from 40mm-1600mm.
High Pressure Plastic Welding Machine,Butt Fusion Welding,Fusion Welding Machine,Plastic Pipe Welding Machine
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com