First: The water jacket inside the sprinkler should be kept clean.
Second: The fuel of the sprinkler is best to use a low condensation point, good fluidity, oil and lubricant. The grease is best used with low viscosity.
Third: Clean the cooling system and add antifreeze.
Fourth: Add a “coat†to the battery, and properly lower the density of the electrolyte to prevent the battery case from freezing.
Fifth: The starter must also be thoroughly cleaned. In winter, the starter is relatively weak.
Sixth: The thermostat must maintain normal operation.
Seventh: In the winter, increase the limit voltage of the regulator by 0.6V.
We are Plastic 3D printing services company which offer almost all kinds of plastic 3d printing services.
Rapid prototyping 3D printing services such as high quality fdm and GDM printing, low-volume production, desktop manufacturing, desktop direct printing, cookie sheet production, die cutting, lamination, desktop publishing, plating, Zebra printing, UV coating, hard coatings, gloss coating, gloss engraving, membrane carving, fiberglass coating, acrylic ink, nylon coating, melamine coating, CMYK printing, foil stamping.We can produce plastic objects out of metal or plastic and without disturbing the original design. Customizable
3D Printing Service,metal 3d printing,sla sls printing
Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com