Product Description:
PB line based on wood as raw materials, shavings, glue, auxiliary equipment, hot pressed density 550-750kg / M 3 man-made sheet. It has a fine smooth surface structure of the core layer gradient, and has good heat insulation, sound insulation and good machining properties, is widely used in manufacturing furniture, high-end cabinets, speakers, and other interior construction and transport. We produce an annual output of 30000-60000 cubic meters of particle board equipment, in a dry, auxiliary equipment, hot press has done a great section in the technical modifications, reduce investment, improve the quality of the products.
 Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes,then the flake stored in wet flake bin.
Â
2) Drying and sifting section
 The flskes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.
Â
3) Forming and hot-pressing section
 The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After process of metal remover , pre-press, lengthwise saw, cross saw, accelerate conveyor,scaling conveyor , storing conveyor and loading conveyor,mats are transported to carrier and then to hot pressing. Rough boards after pressing are pushed to unloader via pallet.
Â
4) Cooling and sizing section
 The rough board is conveyed to star-cooler for cooling ,then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.
Â
5) Sanding section
 The board are sanded,checked and stored.
 PLC control is used in mat-forming section.
The parameter
| No. | Equipment | Specification | Pcs |
| 1001 | Drum chiipper | BX218 | 1 |
| 1002 | Belt conveyer                              | 10000*500mm | 1 |
| 1003 | magnet | Â | 1 |
| 1004 | Chip silo | 50 m3  (prepared by customers) | 1 |
| No.     | Equipment | Specification Pcs | Pcs |
| 2001 | belt conveyer | 500×6000mm | 1 |
| 2002 | pulverizer | 37KW | 2 |
| 2003 | flake pipeline | 7000mm | 2 |
| 2004 | flake silo | 480m3 (prepared by customers) | 1 |
| 2005 | hopper | 10000×8000×2000mm | 1 |
| 2006 | screw feeding out pipe | 4000mm | 1 |
| 2007 | belt conveyer | 6000mm | 1 |
| 2008 | magnet | Â | 1 |
| 2009 | screen | 6000 mm×φ1500mm | 1 |
| 2010 | belt conveyer of unqualified flake | 6000mm | 1 |
| 2011 | Screw conveyor | 4000mm | 1 |
| 2012 | dryer | 12000mm×φ1600mm | 1 |
| 2013 | sieve | 1500mm×φ6000mm | 1 |
| 2014 | hopper | Â | 2 |
| 2015 | Screw conveyor & belt conveyer | 3000mm+8000mm | 2 |
| 2016 | core flake silo | 30m3 (prepared by customers) | 1 |
| 2017 | Surface flake silo | 50m3 (prepared by customers) | 1 |
| 2018 | Screw conveyor | 4000mm | 2 |
Advantages
1.Strict controlling management of raw materials, the main frame is welded by standard steel plate.Â
2.Using domestic international premium accessories and valve blocks of famous brand, greatly reducing the failure rate.
3.Reasonable structure, convenient operation, beautiful appearance, never cut corners  to ensure product quality.
4.High degree autonomy, accessories machinery requiring most can be machined  independently through our own production, achieve excellence.
5.Timely service, product quality assured.
Packing&ShippingWe conduct an high-efficient packaging and shipping system,our workers are experienced and trained.
And we can also pack and ship the machines according to your actual requirements.the datails need more negotiation.
Our company
Â
Â
Shengyang machinery first passed ISO9001-2000 international quality certification system in the  same industry, and also has repeatedly been rated as "municipal contract and trustworthy enterprise", "scientific and technological innovation Star Enterprise" and other honorary titles.We "Shengyang Men" always adhere to "succeed through quality, walk on the path of development of superior quality and high efficience" as business philosophy, "to have a foothold in China and head for the world" as development goal, "honesty first in business, being man before on business" as Shengyang Spirit.Â
Â
Trust us! Once cooperative, long-term friends!
All we "Shengyang Men" welcome your visit!
Our service
We have more than 20 years manufacturing experience,we are factory, not just trading company we will supply you the reliable quality and timely technical support service.
Pre-sale services:
1.Provide the free consultation of the equipment
2.Provide the standard device and the flow chart
3.According to the clients' special requirement, offering the reasonable plan and
 free design helping to select the equipment.
4. Welcome to visit our factory
Services during the sales:
1. Whether you will come (or not) we will let you know the latest progress of producing machines in a timely manner ofÂ
2. Inspect&running the machine before leaving the factory no matter you come or not
After service:
1.Professional oversea installation team,with much experience of installing and debugging
2.Helping to train operator,make them  solve any problems by themseves
FAQ
 particle board production line
Product Description:
PB line based on wood as raw materials, shavings, glue, auxiliary equipment, hot pressed density 550-750kg / M 3 man-made sheet. It has a fine smooth surface structure of the core layer gradient, and has good heat insulation, sound insulation and good machining properties, is widely used in manufacturing furniture, high-end cabinets, speakers, and other interior construction and transport. We produce an annual output of 30000-60000 cubic meters of particle board equipment, in a dry, auxiliary equipment, hot press has done a great section in the technical modifications, reduce investment, improve the quality of the products.
 Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes,then the flake stored in wet flake bin.
Â
2) Drying and sifting section
 The flskes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.
Â
3) Forming and hot-pressing section
 The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After process of metal remover , pre-press, lengthwise saw, cross saw, accelerate conveyor,scaling conveyor , storing conveyor and loading conveyor,mats are transported to carrier and then to hot pressing. Rough boards after pressing are pushed to unloader via pallet.
Â
4) Cooling and sizing section
 The rough board is conveyed to star-cooler for cooling ,then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.
Â
5) Sanding section
 The board are sanded,checked and stored.
 PLC control is used in mat-forming section.
The parameter
| No. | Equipment | Specification | Pcs |
| 1001 | Drum chiipper | BX218 | 1 |
| 1002 | Belt conveyer                              | 10000*500mm | 1 |
| 1003 | magnet | Â | 1 |
| 1004 | Chip silo | 50 m3  (prepared by customers) | 1 |
| No.     | Equipment | Specification Pcs | Pcs |
| 2001 | belt conveyer | 500×6000mm | 1 |
| 2002 | pulverizer | 37KW | 2 |
| 2003 | flake pipeline | 7000mm | 2 |
| 2004 | flake silo | 480m3 (prepared by customers) | 1 |
| 2005 | hopper | 10000×8000×2000mm | 1 |
| 2006 | screw feeding out pipe | 4000mm | 1 |
| 2007 | belt conveyer | 6000mm | 1 |
| 2008 | magnet | Â | 1 |
| 2009 | screen | 6000 mm×φ1500mm | 1 |
| 2010 | belt conveyer of unqualified flake | 6000mm | 1 |
| 2011 | Screw conveyor | 4000mm | 1 |
| 2012 | dryer | 12000mm×φ1600mm | 1 |
| 2013 | sieve | 1500mm×φ6000mm | 1 |
| 2014 | hopper | Â | 2 |
| 2015 | Screw conveyor & belt conveyer | 3000mm+8000mm | 2 |
| 2016 | core flake silo | 30m3 (prepared by customers) | 1 |
| 2017 | Surface flake silo | 50m3 (prepared by customers) | 1 |
| 2018 | Screw conveyor | 4000mm | 2 |
Advantages
1.Strict controlling management of raw materials, the main frame is welded by standard steel plate.Â
2.Using domestic international premium accessories and valve blocks of famous brand, greatly reducing the failure rate.
3.Reasonable structure, convenient operation, beautiful appearance, never cut corners  to ensure product quality.
4.High degree autonomy, accessories machinery requiring most can be machined  independently through our own production, achieve excellence.
5.Timely service, product quality assured.
Packing&ShippingWe conduct an high-efficient packaging and shipping system,our workers are experienced and trained.
And we can also pack and ship the machines according to your actual requirements.the datails need more negotiation.
Our company
Â
Â
Shengyang machinery first passed ISO9001-2000 international quality certification system in the  same industry, and also has repeatedly been rated as "municipal contract and trustworthy enterprise", "scientific and technological innovation Star Enterprise" and other honorary titles.We "Shengyang Men" always adhere to "succeed through quality, walk on the path of development of superior quality and high efficience" as business philosophy, "to have a foothold in China and head for the world" as development goal, "honesty first in business, being man before on business" as Shengyang Spirit.Â
Â
Trust us! Once cooperative, long-term friends!
All we "Shengyang Men" welcome your visit!
Our service
We have more than 20 years manufacturing experience,we are factory, not just trading company we will supply you the reliable quality and timely technical support service.
Pre-sale services:
1.Provide the free consultation of the equipment
2.Provide the standard device and the flow chart
3.According to the clients' special requirement, offering the reasonable plan and
 free design helping to select the equipment.
4. Welcome to visit our factory
Services during the sales:
1. Whether you will come (or not) we will let you know the latest progress of producing machines in a timely manner ofÂ
2. Inspect&running the machine before leaving the factory no matter you come or not
After service:
1.Professional oversea installation team,with much experience of installing and debugging
2.Helping to train operator,make them  solve any problems by themseves
FAQÂ
Fiberglass Mesh
Fiberglass Mesh,Fiberglass Mesh 4X4,Fiberglass Mesh 5X5,Alkali Free Fiberglass Mesh
SANXING WIRE MESH FACTORY provide first-class fiberglass screening and excellent services for worldwide customers. We can also develop different fiberglass screening products like sunshade, portiere and so on. Fiberglass screen, or fiberglass screening, fiberglass insect screen, glass fiber screen, is made of glass fiber by the means of filament plastic-coating process. Fiberglass screen is plain weaving, and high temperature-fixing.
Fiberglass reseal cloth react important affect in heat preservation system, prevent crack. As the result of the excellent characteristics of acid-resisting, alkali-resisting, the heat preservation system is pressed equably. It can prevent deforming from the collision and extrude easy to construe and control quality, it has the effect of soft steel bar.
Fiberglass Mesh,Fiberglass Mesh 4X4,Fiberglass Mesh 5X5,Alkali Free Fiberglass Mesh
Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com