Model NO.: 3CPV
Rotation Axis: Asynchronous Motor, 4.0kw
Tube Od of Chamfer/Squaring/Deburring: 6-80mm
Tube Od of Flaring: 6-80 mm
Tube Od of Beading: 6-75 mm
Trademark: Hartco
Transport Package: Wood
Specification: OD6-80mm
Origin: Shanghai
HS Code: 8461909000
Model NO.: 3CPV
Rotation Axis: Asynchronous Motor, 4.0kw
Tube Od of Chamfer/Squaring/Deburring: 6-80mm
Tube Od of Flaring: 6-80 mm
Tube Od of Beading: 6-75 mm
Trademark: Hartco
Transport Package: Wood
Specification: OD6-80mm
Origin: Shanghai
HS Code: 8461909000
3CPV Semi-automatic Tube End Finish Machine
Description: Semi-automatic Tube End Finish Machine
Model: 3CPV
Application:Used for deburring,flaring,Beading for Inside and outside of metal round tube end.
Introduce:
Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another.
Main Specification:
  1. Dimensions: Long X Wide X High (excluding protruding parts) =660X1000X1230mm
  2. Weight: 500 kg
  3. Power supply: 380V±10%, 50Hz/60Hz, three phase
  4. Power: 4 KW
  5. Air pressure: 0.4-0.8MPa;
  6. Clamping mode: pneumatic;
  7. Clamping force: >=20KN;
  8. Rotation axis: asynchronous motor, 4.0kw;
  9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
  10. Rotation axis deflection: ≤0.01 mm;
Capacity:
  1. Tube OD of chamfer/squaring/deburring: Φ6-80mm;
  2. Tube WT of chamfer/squaring/deburring: ≤10mm;
  3. Tube OD of flaring: Φ 6-80 mm;
  4. Tube WT of flaring:
Stainless steel 0.4 ~ 2.5mm, Aluminum alloy 0.5 ~ 3.5mm;
  1. Flaring method: eccentric inner diameter rotary swage;
  2. Tube OD of beading: Φ6-75 mm;
  3. Tube WT of beading: stainless steel: ≤1mm, aluminum alloy: ≤ 2mm;
  4. Beading method: inner diameter rotary swage;
  5. Tube min clamp: 15mm (flare tube is based on material and wall thickness);
  6. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
  1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
  2. After quick change dies, it can complete the tube flaring processing and beading.
  3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
  4. Thin clamp and thin dies, the minimum length of tube is 15mm, which is the first and best level.
  5. Control of the feed cylinder is linkage with the clamp cylinder, the clamping cylinder is automatically clamped when the feed cylinder is started, and then spindle forward for processing, once finish, the spindle retreat, clamp cylinder automatically open.
  6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
  7. Tube feeding length positioning function, ensure tube process length and repeat precision.
  8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
  9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
  1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
  2. Variable frequency control of motor, to achieve the spindle high precision control.
  3. Clamp on the machine cabinet front, it can clamping minimum 15mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
  4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
  5. Double feed mode: cylinder feed and handwheel feed, control feed speed, make operation smoother and save physical power.
  6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
  7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
  8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
  1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.Tube Former with Ce Certificate (3CPV)
  2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.Tube Former with Ce Certificate (3CPV)
  3. Die adapter: used for installation of flaring dies or beading dies of small tube dimension.Tube Former with Ce Certificate (3CPV)
  4. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness. 
    Tube Former with Ce Certificate (3CPV)
  5. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
    Tube Former with Ce Certificate (3CPV)
3CPV Semi-automatic Tube End Finish Machine
Description: Semi-automatic Tube End Finish Machine
Model: 3CPV
Application:Used for deburring,flaring,Beading for Inside and outside of metal round tube end.
Introduce:
Using the tube end-finishing machines, the ends can be prepared with a bead or flare, or simply deburred and squared. Each machine is capable of performing all of these functions -a change of tooling is all that is required to switch from one function to another.
Main Specification:
  1. Dimensions: Long X Wide X High (excluding protruding parts) =660X1000X1230mm
  2. Weight: 500 kg
  3. Power supply: 380V±10%, 50Hz/60Hz, three phase
  4. Power: 4 KW
  5. Air pressure: 0.4-0.8MPa;
  6. Clamping mode: pneumatic;
  7. Clamping force: >=20KN;
  8. Rotation axis: asynchronous motor, 4.0kw;
  9. Coaxial of rotation spindle with clamping shaft: ≤0.02 mm;
  10. Rotation axis deflection: ≤0.01 mm;
Capacity:
  1. Tube OD of chamfer/squaring/deburring: Φ6-80mm;
  2. Tube WT of chamfer/squaring/deburring: ≤10mm;
  3. Tube OD of flaring: Φ 6-80 mm;
  4. Tube WT of flaring:
Stainless steel 0.4 ~ 2.5mm, Aluminum alloy 0.5 ~ 3.5mm;
  1. Flaring method: eccentric inner diameter rotary swage;
  2. Tube OD of beading: Φ6-75 mm;
  3. Tube WT of beading: stainless steel: ≤1mm, aluminum alloy: ≤ 2mm;
  4. Beading method: inner diameter rotary swage;
  5. Tube min clamp: 15mm (flare tube is based on material and wall thickness);
  6. Tube material: all kinds of titanium alloys, stainless steel, aluminum alloy;
Features:
  1. One clamping can be completed squaring, deburring, inside and outside chamfering at the same time.
  2. After quick change dies, it can complete the tube flaring processing and beading.
  3. Cylinder clamping function, make the fitting clamping tight. Clamping with buffer, avoid damaging the tube.
  4. Thin clamp and thin dies, the minimum length of tube is 15mm, which is the first and best level.
  5. Control of the feed cylinder is linkage with the clamp cylinder, the clamping cylinder is automatically clamped when the feed cylinder is started, and then spindle forward for processing, once finish, the spindle retreat, clamp cylinder automatically open.
  6. Equipped asynchronous motor spindle, speed variable frequency control adjustment, is suitable for the processing of different materials.
  7. Tube feeding length positioning function, ensure tube process length and repeat precision.
  8. Flaring center is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.
  9. The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.
Main Components:
  1. The spindle on the top, opening is very good, especially suit for bended complex shaped tube.
  2. Variable frequency control of motor, to achieve the spindle high precision control.
  3. Clamp on the machine cabinet front, it can clamping minimum 15mm straight tube. The clamp is placed on the outside, the main shaft is located at the top, and the volume is less than the clamp shape, so the machine is very open, the tube end processing of complex tubing is guaranteed.
  4. The clever design chip groove in clamp, lead the dust smoothly into waste box.
  5. Double feed mode: cylinder feed and handwheel feed, control feed speed, make operation smoother and save physical power.
  6. Tube feed stopper: when the spindle forward, stopper automatic drop down. Feed length is adjustable, and can be mechanical lock.
  7. Spindle feed position:ensure consistency processing of feed, while ensuring the spindle and clamp non-interference.
  8. Organic glass protective cover/waste box, It is the best protection for personnel, and can collect the waste.
Tooling:
  1. Flaring center: Is a eccentric shaft, one specification of the flaring center can make a variety of sizes, a variety of wall thickness of tube flaring processing.Tube Former with Ce Certificate (3CPV)
  2. Flaring dies: The dies for chamfer&deburing&squaring can be directly use flaring Dies, reducing dies specification, and reducing the time of replacing.Tube Former with Ce Certificate (3CPV)
  3. Die adapter: used for installation of flaring dies or beading dies of small tube dimension.Tube Former with Ce Certificate (3CPV)
  4. The squring&deburing head design is smart, the blade position can be adjusted, one set of blade can complete squring, deburing, chamfer for different tube dimension with wall thickness. 
    Tube Former with Ce Certificate (3CPV)
  5. Beading head is used with beading tip or beading arbor, the minimum can complete the 6mm tube beading. 
    Tube Former with Ce Certificate (3CPV)

1 Ton Pedestrian Type Electric Stacker

Electric Stacker is an industrial device for loading and lifting pallets on a shelf at high level. As an ideal choice to operate in narrow space of warehouse, it can be widely used in petroleum, chemical, pharmaceutical, textile, pigment, coal and other industries, as well as ports, railways, freight yards, warehouses.



1. Mast which can provide wide field of vision
The hydraulic cylinder is located at the right-middle side of the stacker, thus providing a wider field of vision for the operator.

2. Double speed switch
The speed of this electric stacker can be freely switched between normal speed and slow speed. The operators can choose slow speed to realize slow moving of the stacker. This is especially suitable for new operators who are not familiar with the operation of this equipment.

3. Lateral vertical moving
The stacker can move without pulling the handle. By pressing down the straight moving button, the stacker can move slowly. This is suitable for working in narrow aisles and other limited spaces.

4. Adjustable balance and supporting wheel
The adjustable balance wheel features strong stability, so that the operation can be more stable, safer and more reliable.

5. Solid channel steel mast
Compared with the bending finished iron metal mast, the channel steel mast is more solid and durable, more stable and safer.

6. Intelligent sleep mode
When the stacker is not in use for long time, the intelligent sleep mode will be automatically initiate to save battery power and cost.

7. Handle of the best one-step length
The long operating handle adopts ergonomic design. The max ground clearance is 1305mm and the min ground clearance is 715mm, so that it quite easy to use. During normal operation, the operators should be one-step away from the stacker, so that their feet will not get caught by the wheel, thus ensuring safety of the operators.

8. Split type mast
The fabricated connection of the mast and stacker frame can realize easy installation and changing of the mast as necessary. The working device and moving device are easily disassembled and changed.

9. Beautiful and tiny appearance
The base design: the front base is 600mm in length so that it is flexible and suitable for working in narrow channels. It is the ideal choice for trans-floor working.

Full electric stacker,Semi electric stacker,All terrain electric stacker,Ameise electric stacker,Apollo electric stacker

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com