Recently, nearly 50 ship electronics experts, scholars and engineering technicians from Shanghai went to the Shanghai Base of the National 863 Software Professional Incubator, and listened to the advantages of the “incubator†based on the 704, 711 and Shanghai Ship Transportation Science Research Institutes. The core technology of ship automation, which is the key to the project, is the introduction of the "Research and Development of Embedded Systems for Marine Automation" project. The "Ship Automation Embedded System Research and Development" project is an important part of the Shanghai Municipal Science and Technology Commission's major project - "Application-Oriented Embedded Systems and Product Development". Its main target is to use the embedded real-time operating system as the core, and take the ship electronic system with "high added value and high technical characteristics" as the entry point, establish a technical service support system suitable for ship automation, and realize the embedded in the ship field. The autonomy and industrialization of system product development will enhance the core competitiveness of ship automation technology with independent intellectual property rights, and accelerate the cultivation of marine automation embedded software professionals through independent research and development. According to the plan, the research and development of the entire project began in March 2005 and ended in December 2006.
There are three research directions in Shanghai's three major research institutes: one is to develop ship monitoring system software; the other is to develop ship automation control system software based on embedded real-time operating system; the third is to establish a ship automation monitoring system system based on embedded system. Structure and interface specifications. The main research contents include ship main power monitoring system, ship auxiliary machine embedded control system, ship navigation data recorder and so on.
Hydraulic Ironworker
Ironworker is a class of machines that can shear, notch, and punch holes in steel plate.Ironworkers are built with safety in mind, but they still present hazards that must be addressed and thoroughly thought out before they are purchased. Most of them have at least 4 stations that require boundaries around them to safely produce parts. They can shear flat plate, angle iron, round and square bar stock as well as punch plates, angles, I-beam and channel iron. Some have a station for notching and forming of different materials. The area around each station should be at least 20 feet since that is the common stock length of most materials used on ironworkers.
Hydraulic Ironworker,Hydraulic Ironworker Machine,Punching And Shearing Machine,Punch And Shear For Sale
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hostoncncs.com