Butterfly valve refers to the closure (valve or disc) for the disc, around the valve shaft to open and close a valve, cut off and throttling in the pipeline. Butterfly valve opening and closing pieces is a disc-shaped disc, the valve body around its own axis of rotation, so as to achieve the purpose of opening and closing or regulation. The butterfly valve fully open to the whole is usually less than 90 °, the butterfly valve and the butterfly itself does not have self-locking ability, in order to disc positioning, to install a worm reducer on the stem. The use of worm reducer, not only can make the disc self-locking ability to stop the butterfly plate in any position, but also to improve valve performance. Industrial butterfly valve features high temperature, high pressure range, the valve nominal diameter, the valve body made of carbon steel, the valve ring using a metal ring instead of rubber ring. Large high temperature butterfly valve welded steel manufacturing, mainly for high temperature medium smoke duct and gas pipelines. The advantages of butterfly valves are as follows: 1, quick and easy opening and closing, effort, fluid resistance, you can often operate. 2, simple structure, small size, light weight. 3, you can transport the mud, the liquid accumulated in the pipe port at least. 4, under low pressure, can achieve a good seal. 5, adjust the performance. The shortcomings of the butterfly valve are as follows: 1, the use of pressure and small working temperature range. 2, poor sealing. Butterfly valve can be divided according to the structure of the bias plate, vertical plate, inclined plate and lever. According to the sealing form can be divided into more sealed and hard seal two. Rubber seals are generally used rubber ring seal, hard seal is usually used metal ring seal. According to the connection type can be divided into flange connection and the clamp connection; According to the transmission can be divided into manual, gear transmission, pneumatic, hydraulic and electric several. Butterfly valve installation and maintenance should note the following: 1, the installation, the valve to stop in the closed position. 2, the opening position should be determined by the rotation angle of the disc. 3, with bypass valve butterfly valve, open the bypass valve should be opened before. 4, should be installed according to the manufacturer's installation instructions, the weight of the butterfly valve, should be set up a solid foundation.
Ambulance,Ambulance Car,Diesel Ambulance,First Aid Ambulance Car
ChengLi Special Automobile Co.,LTD , https://www.chenglispecialautomobile.com.cn