China's first independent research and development of 150 degrees Celsius electric pump downhole sensor, the cost is lower than imported products by half, to fill the domestic temperature level of 150 degrees Celsius underground sensor technology gap.
The first prototype of 150 ℃ electric pump downhole sensor in China recently has been applied on-site for more than two months at the 3-D 4-P38 well in North Daqing Oil Field, and the effect is good. Technical personnel after a month of monitoring that this product can accurately measure the submersible pump inlet pressure, outlet pressure, well fluid temperature, motor temperature, vibration and other seven parameters. "With these parameters, we can know the parameters of oil well production in time, analyze the status of oil well production, help users to optimize the ESP program and improve the oil recovery efficiency." Han Ji-qiang, Deputy Director of Electrical Design, Liqin Pump R & D Center, Daqing Oilfield .
Han Jijiang introduction, began to develop this product in 2014, when the domestic electric pump downhole sensors are mostly resistant to 125 degrees Celsius, and breakthrough "125 degrees Celsius" is particularly difficult, but also particularly critical. Technical staff through in-depth power system, data acquisition and signal conditioning unit, timing control and data transmission mechanism in-depth study, the formation of 150 degrees Celsius temperature multi-channel time-sharing transmission technology, with self-stability underground power supply technology instrument two key technology. In November last year, the research team broke through the technical bottleneck of the domestic sensor with the maximum temperature of 125 degrees Celsius, solving the technical problems of the traditional design scheme of timing control circuit being expensive, the high static power consumption of the underground power supply, and the export restriction of the related high and small devices abroad.
Daqing Oilfield 150 degrees Celsius pump downhole sensor mainly for overseas markets. In recent 4 years, Daqing Oilfield Lisen Pump overseas market an average of 160 sets of this product every year, a set of equipment than the use of foreign products to save 50,000 yuan, a year to save 8 million yuan. Next, Daqing Oilfield will carry out scale promotion of downhole sensors at 150 degrees Celsius, gradually replacing the original foreign products.
In recent years, Daqing Lizhen pump industry to develop electric pump downhole sensor technology and products, has now achieved serialization, categories were two parameters, four parameters, seven parameters, the temperature level is divided into two levels of 125 degrees Celsius and 150 degrees Celsius, pressure Levels are divided into 25 MPa and 40 MPa two levels.
Operated with Computer Numerical Control (CNC) systems and provided with precise design instructions, CNC Lathes are machine tools where the material or part is clamped and rotated by the main spindle, while the cutting tool that work on the material, is mounted and moved in various axis.
CNC Lathes are normally used for machining parts, where the material / part is clamped and rotated whereas the cutting tool is stationery mounted for OD (Outer Diameter) and ID (Inner Diameter) operations, e.g. shafts and pipes. They are ideal for parts that have same symmetry around an axis that could be chucked up (i.e. radially clamped) in the spindle.
A simple CNC Lathe operates on 2-axis and the tool is located in a fixed position at 8 to 24 station turret. The rotating action of the part is called [turning", hence certain types of CNC Lathes are called CNC Turning Machines.
Milling (cutting tool moves around stationery workpiece), boring and tapping (a tool that cuts threads inside hole) tools are normally driven by a separate drive system inside the turret. Depending on the application, the life tools (i.e. active tool) are mounted for axial or radial operational directions. These could be found in 3-axis CNC Lathes or CNC Turning Machines.
Lathe machines with additional options such as Y-axis, sub-spindles, or specific selected options for automation are commonly called Turning Centres. These sophisticated machine tools are capable of machining complex parts – these go beyond standard OD & ID turning operations and may incorporate milling, drilling and tapping operations to complete the part in one setting. Taking a piece from raw part to finished product, such all-in-one machine tools significantly improves productivity.
Cnc Lathe,Cnc Lathe Machine,Cnc Lathe For Sale,Cnc Lathe Machine Price,CNC Lathe at a Favorable Price
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.haostonmachinetools.com