*WSV series miniature solenoid valve orifice size 2mm,3mm,4mm
*Two position two way direct acting
*Port Size G1/8”,G1/4”
*Seal NBR material
*Miniature compact design,small volume,flexible application
*WSV series valve use especially in welding machine equipment
|
ORDERINGÂ CODE | ||||
| WSV | 2 | 3 | 01 | AC220V |
| Type | Position and Numbers | Orifice Size | Port size | Voltage |
| WSV:WSV Series Miniature solenoid valve for Welding Machine | 2:Two position Two Way | 2:2mm | 01:G1/8" | DC12V |
| 3:3mm | 02:G1/4" | DC24V | ||
| AC110V | ||||
| 4:4mm | M10:M10X1.0 | AC220V | ||
| AC24V | ||||
Â
| SPECIFICATION | |
| Model No | WSV Series |
| Working Medium | Air,Water,Oil,Gas |
| Motion Pattern | Direct Drive Type |
| Initial State | Normal Close |
| Aperture of Flow Rate(mm) | 2mm,3mm,4mm |
| Joint Pipe Bore | M10X1.0,G1/8",G1/4" |
| Operation Fluid Viscosity | 50 CST(Below) |
| Working-pressure MPa | 0~1.0MPa |
| Operating Temperature ºC | –20 ~ 50ºC |
| Voltage Range | ±10% |
| Material of Body | Brass |
| Material of Oil Seal | NBR |
1, Commodity: cold rolled Zinc Coated hot dipped Galvanized Steel strip/coil/banding/belt
2, Standards: GB700-88 and GB/T 8164-1993
3, Material Grade: Q195,Q195L,Q215,Q235,SPHC,SPHD,08AL,SS300,SS400,SS490,etc
4, Thickness: 0.14-1.5mm (+-0.02mm)
5, Width: 30-600mm (+-2mm)
6, Zinc coating: Z30-100g/m2
7, Surface treatment: (non) Chromated,( 1965170,un)Oiled,Minimized spangle,
Regular spangle, Skin-passed,Non skinpassed
8, Coil weight: baby coil weight 300~1000KG, each pallet weight below 3000KG
or as client`s requirement
9, Coil ID: 508/610mm
10, Quality: No Joint, No Bends, no spots, no roller marks.
Cold Rolled Steel Coil,Steel Coil,Cold Rolled Steel,Cold Roled Coil
WENZHOU ICL INDUSTRIAL CO., LTD. , https://www.cniclsteel.com