Transformer loss parameters intelligent tester features

1. Measurement of no-load loss: The instrument displays three-phase voltage, three-phase current, and three-phase power. The instrument displays the distortion rate of the applied power waveform and automatically calculates the no-load current of the transformer. It is converted to the rated voltage and waveform distortion is performed. Corrected no-load loss.

2. Measurement of load loss: TPBZC transformer loss parameter tester can display three-phase voltage, three-phase current, and three-phase power, and automatically calculate the transformer's impedance voltage percentage and convert it to the rated temperature and load loss under rated current.

3, three-phase transformer single-phase measurement: can be used to check the transformer single-phase defects or for the scene without three-phase electricity situation. The instrument can record the data of three single-phase measurements, and calculate the no-load current, no-load loss, impedance voltage and load loss of the transformer according to the different connections of the transformer.

4, loss of inquiry function: the instrument contains the national standard 30KVA-2500KVA amorphous alloy, S11, S9, S7, the percentage of no-load current, no-load loss, impedance voltage percentage, load loss, according to the type of transformer, The capacity of the transformer is queried.

5, in the instrument allows the measurement range can be measured directly, beyond the measurement range can be external voltage, current transformer, the instrument can set the ratio of external voltage and current transformer, directly display the value of the applied voltage and current.

6. The large-screen liquid crystal display of the instrument can display three-phase voltage, three-phase current, three-phase power, three-phase average voltage, average current, three-phase total power and related data on the same screen. Instrument Chinese menu, Chinese tips, easy to operate.

7. The instrument is equipped with a 232 interface, which can be used to communicate with the computer through the data line, and provide background data management software running on the computer.

8, the instrument comes with a printer, print display data, built-in memory, power loss is not lost, the instrument can store 20 sets of data.

9, permanent calendar, clock function, time calibration.

Laser Measurement

CNI as a world`s leading designer and manufacturer of Laser system, fully understood your actual demands of laser measurement and analytical capability, designed several laser measurement which are specially tailored to you. Based on the understanding of practical applications, advanced technology and precise selection of devices, CNI dedicated to helping you find the best choice which can not only meet your measurement requirements, but also offer the most competitive price. The modular options we offered made it easier for you to extend the configuration when your demands increased or changed in the future, which improved the cost performance.
In addition, we also provide data testing and customized services of laser measurement protection system, which are based on customer`s needs.


Laser Power&Stability Measurement		Laser Wavelength Measurement
Laser Power Meter is used to measure laser power and power stability. CNI provides customers thermoelectric and photoelectric power meters...		Fiber optic Spectrometer is used to measure wavelength, line width of laser and common light source, also to measure fluorescence, Raman, plasma spectrum...

Laser Pulse Measurement		Longitudinal Mode Measurement
High-speed photodetector combined with oscilloscope can monitor ultra-fast Pulsed Laser and measure pulse duration, frequency, period and other parameters of lasers...		F-P scanning interferometer is used for longitudinal mode measurement. Laser longitudinal mode refers to the axial distribution of the light field along to its direction of propagation...

Coherence Length Measurement		Noise Measurement
Using Michelson interferometer to split the laser beam in two. When the two light beams recombine, they interfere and form interference fringes in the focal plane.		Silicon photodetector is used to measure noise, the oscilloscope displays noise signals. According to the noise signals, we can see if the laser has good transient stability...

Multi Channel Laser Power Meter,Laser Measurement,Economical Type Stages Powermeter,New Ir Viewing Card

Changchun New Industries Optoelectronics Technology Co., Ltd. , https://www.lasersciences.com