With the rapid development of the national economy and the rapid advancement of people’s living standards, the majority of people have put forward higher requirements for the taste and quality of food, especially for rice made of finished rice, which requires a clean, fresh air, moderate fragrance, and moderate hardness. . In a short period of time, when the rural economy develops to a certain level, the land will gradually be concentrated in the fields, and the grain dryer will gradually enter the farmer households, and the number of promotion will be greatly promoted. The new technology and new process of high-water foodstuffs, which are recycled into the machine to circulate and dry to safe water, has contributed to the national food security and increased income for agricultural and rural farmers.

According to the analysis of China's current rural planting structure and economic development, China's grain dryers are suitable for application in grain warehouses, seed companies, farms, large farms, and grain processing plants. Therefore, there is a large demand for grain dryers in China. The promotion and application of the vision is very broad. At present, dry rice and wheat in most of China's rural areas still adopt the natural drying method because the drying area is small, the drying efficiency is low, and the effect is poor, easy to pollute, and the loss is large. The traditional drying method and the rapid development of the mechanized harvest level are extremely incompatible. . Rice, wheat, and corn are the main food crops in China. The total annual output is about 400 million tons.

The grain dryer has a simple structure, small volume, convenient operation, no auxiliary equipment, and is convenient for conveying and moving. The cleaning is easy and thorough, it will not be mixed, especially suitable for drying cereal seeds. Using hot air as a drying medium and using a cyclic drying process, the grain is heated and dehydrated uniformly and fully, and the quality after drying is good. Coal, rice hulls or straws are used as fuel. After combustion and heat exchange, they are converted into clean hot air and have no pollution to the dried grains. The equipment is used to dry grain, grain crops such as wheat, corn, rice, and beans.

Grain dryer equipment powerfully promoted the development of the enterprise, led the technological advancement of similar products in the industry, and led to the optimization and upgrading of the industry's products. Delayed coking refers to the use of crude oil and slop oil, which are residuum or residual oils. After a deeper understanding, when the equipment is heated to a certain temperature, the coking coking reaction is usually not performed in the heating furnace, but according to the characteristics of the equipment. The delay was extended to the coke drum. At the same time, the cracking and condensation reactions occurred under comparable temperature and pressure conditions in the tower. To adapt to different locations of drying operations, the design of the size of different specifications, a large amount of wind and wind, no civil construction, adapt to large and medium-sized enterprises, enter millions of households.

Laser Cladding Powder

Nickel Based Laser Cladding Powder

Ni base alloy powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has good wettability, corrosion resistance and high temperature self-lubricating effect, and is used in components with heat resistance, corrosion resistance and thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser cladding, the No means hardness of powder. Inconel 625 and 718 has good corrosion property under higher temperature, also widely used for laser cladding process.


Cobalt based Laser Cladding Powder

Cobalt-based alloy powder is the cemented carbide resistant to various types of wear and corrosion as well as high temperature oxidation. That is, the so-called cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based alloy is mainly composed of cobalt, containing a considerable amount of nickel, chromium, tungsten and a small amount of molybdenum, niobium, tantalum, titanium, Alloying elements such as lanthanum, and occasionally a class of alloys containing iron.

Co-based self-fluxing alloys have good high temperature performance and wear resistance and corrosion resistance, and are used in petrochemical power, metallurgy and other industrial fields where they are wear-resistant, corrosion-resistant and high-temperature resistant.

Laser Cladding


Iron based Laser Cladding Powder

The work pieces required for laser cladding and manufacturing in the actual industry are mainly carbon steel and cast steel. The Fe-based alloy is close to the base material in composition and has good wettability. The advantage of Fe base powder is lower cost and good wear resistant of cladding layer. As a result, it`s the most widely used for laser cladding process. It is suitable for parts that require local wear resistance and are easily deformed.

Laser Cladding Work Part



WC blended Laser Cladding Powder

Tungsten carbide blended with Ni alloy powder is the best choice for wear resistant work piece. This unique process can bring excellent wear, corrosion and high temperature resistant. Our blend powder can achieve different portion of WC from 35% to 60% without crack under suitable cladding parameter.


Laser Cladding 2


Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcwelding.com