Company Name Xiagong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd.
★Product Name Oil Truck
★Product model CSC5320GYYC5
Vehicle parameters
★Dimensions (length × width × height) mm 11900 × 2500 × 3505
★The size of the cargo compartment panel (length × width × height) mm or volume m3 27.3
★Preparation quality kg 13600
★ Total mass kg 32000
★Drive type 8X4
Chassis configuration and technical parameters
★Chassis manufacturer China First Automobile Group Co., Ltd.
★ Chassis model CA5320GYYP63K1L6T4E5
★ Engine manufacturer China First Automobile Group Co., Ltd.
★ Engine model CA6DK1-28E5
★Transmission model CA9TB
★Main reducer speed ratio (drive axle speed ratio) 4.333
★ tire specifications model 12R22.5, 11.00R20
★Comprehensive fuel consumption L/100km 31.5
★ 50km/h no-load constant-speed fuel consumption L/100km 18.8
ã€The main technical parameters】
Product trademark Chusheng
Announcement batch 285
Product Name CSC5320GYYC5 Oil Tanker
Product No.ZM96V56P014
Total mass (Kg) 32000
Tank volume (m3) 27.3
Rated load mass (Kg) 18205, 18270
Dimensions (mm) 11900×2500×3505
Curing quality (Kg) 13600
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3,2
Load mass utilization factor
Approach angle / departure angle (°) 13/11
Front overhang / rear overhang (mm) 1460/2590
Number of axes 4
Wheelbase (mm) 1950+4550+1350
Axle load (Kg) 6500/6500/19000 (with two axes installed)
Maximum speed (Km/h) 79
Other 1, transport medium: gasoline, category number: 3, density: 700 kg / cubic meter. The effective volume of the tank is 27.3 cubic meters. The outer dimensions of the tank (length × width × height) (mm): 9100 × 2460 × 1760; 2, the side protection is symmetrical with cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235 and welded. The height of the rear protection section is 120mm, the section width is 50mm, and the lower edge is 500mm from the ground. 3. The optional cab is used with the chassis. Only the radial tire, the speed limit device and the chassis of the front disc brake are used. The installation has satellite positioning function. Drive recorder; ABS model / manufacturer: VIE ABS-II / Zhejiang Wanan Technology Co., Ltd.
Industrial 3D Printer,3D Printed Sand Sculpture,Rapid Manufacturing 3D Printer,Rapid 3D Sand Printing
Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzl3d-printer.com