- Model NO.: QY Serious
- Max.Capacity: >400 L/min
- Material: Cast Iron
- Assembly: impeller
- Start Up: Electric Pump
- Application: Submersible Pump, Clarified Water Pump
- Media: clean water
- Theory: Centrifugal Pump
- Transport Package: Wooden Box
- Origin: Zhejiang, China
- Max.Head: 110m-150m
- Driving Type: Motor
- Structure: Multistage Pump
- Power: Electric
- Type: Positive-Displacement Pump
- Industry: Mechanical Pump
- Performance: water pump
- Trademark: KAILI
- Specification: 3.0-20HP
- HS Code: 8413709190
Product introduction
QY Oil-filled submersible pump consists of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is three-phase is at the upper part of pump and seal is used where pump and motor combine, which is a kind of double end mechanical seal, O rings are applied to all static joints.
Application
This series pumps because of wide range of flow and head, is extensively used for electrical irrigation, forest water spraying, pumping water from well, water tower deliver and urban construction water supply and discharge for farms, villages, industrial and mining enterprise.
Work conditions
The pump can work properly and continuously under following operational conditions:
1) Medium is not corrosive .Sand contents should be max 0.10% by volume and granular size should be max. 0.20mm.
2) Medium temperature shouldn't be over 40ºC and PH should be 6.5-8.5.
3) The pupmps should be operated within rated head.
4) The pumps should be fully submerged into water with depth of less than 3m and max . The pump should be min. 0.5m over the water bottom and not be inserted into sludge .
5) Power frequency should be 50HZ,three-phase voltage 380V,and voltage fluctuation should be 0.9-1.1 times than the rated.
Model instruction
Workshop show
Material
| Structure of pump | Material | Can be selected |
| Pump body | Cast-Iron |
 |
| Impellor | Cast-Iron |
 |
| Pump shaft | 45 # Steel |
 |
| Cable |
 |
Arbitrary length |
Main Specification
Model |
Power |
Flow |
Head |
Velocity |
Pipe size |
kw |
m3/h |
m |
V |
Inch |
|
QY10-34-2.2 |
2.2 |
10 |
34 |
380 |
1.5 |
QY15-26-2.2 |
2.2 |
15 |
26 |
2 |
|
QY25-17-2.2 |
2.2 |
25 |
17 |
2.5 |
|
QY40-12-2.2 |
2.2 |
40 |
12 |
3 |
|
QY65-7-2.2 |
2.2 |
65 |
7 |
4 |
|
QY100-4-2.2 |
2.2 |
100 |
4 |
6 |
|
QY15-36-3 |
3 |
15 |
36 |
2 |
|
QY25-26-3 |
3 |
25 |
26 |
2.5 |
|
QY40-16-3 |
3 |
40 |
16 |
3 |
|
QY65-10-3 |
3 |
65 |
10 |
4 |
|
QY100-7-3 |
3 |
100 |
7 |
6 |
|
QY12.5-50-4 |
4 |
12.5 |
50 |
2 |
|
QY25-32-4 |
4 |
25 |
32 |
2.5 |
|
QY40-21-4 |
4 |
40 |
21 |
3 |
|
QY65-14-4 |
4 |
65 |
14 |
4 |
|
QY100-9-4 |
4 |
100 |
9 |
6 |
|
QY200-4.5-4 |
4 |
200 |
4.5 |
6 |
|
QY260-4-4 |
4 |
260 |
4 |
8 |
|
QY15-55-5.5 |
4 |
15 |
55 |
2 |
|
QY25-40-5.5 |
4 |
25 |
40 |
2.5 |
|
QY40-28-5.5 |
5.5 |
40 |
28 |
3 |
|
QY65-18-5.5 |
5.5 |
65 |
18 |
4 |
|
QY100-12-5.5 |
5.5 |
100 |
12 |
6 |
|
QY250-5-5.5 |
5.5 |
250 |
5 |
8 |
|
QY20-55-7.5 |
7.5 |
20 |
55 |
2 |
|
QY25-50-7.5 |
7.5 |
25 |
50 |
2.5 |
|
QY40-38-7.5 |
7.5 |
40 |
38 |
3 |
|
QY100-17-7.5 |
7.5 |
100 |
17 |
4 |
|
QY160-11-7.5 |
7.5 |
160 |
11 |
6 |
|
QY250-7-7.5 |
7.5 |
250 |
7 |
8 |
|
QY40-58/2-11 |
11 |
40 |
58 |
3 |
|
QY65-46/2-11 |
11 |
65 |
46 |
4 |
|
QY100-25/2-11 |
11 |
100 |
25 |
6 |
|
QY300-10-11 |
11 |
300 |
10 |
6 |
|
QY400-7.5-11 |
11 |
400 |
7.5 |
8 |
|
QY40-87/3-15 |
15 |
40 |
87 |
3 |
|
QY65-62/3-15 |
15 |
65 |
62 |
4 |
|
QY160-22-15 |
15 |
160 |
22 |
6 |
|
QY200-16-15 |
15 |
200 |
16 |
8 |
|
QY25-38/2-3 |
3 |
25 |
38 |
380 |
2.5 |
QY10-54/3-3 |
3 |
10 |
54 |
2 |
|
QY10-70/4-4 |
4 |
10 |
70 |
2 |
|
QY10-86/3-5.5 |
5.5 |
10 |
86 |
2 |
|
QY18-64/3-5.5 |
5.5 |
18 |
64 |
2.5 |
|
QY10-110/4-7.5 |
7.5 |
10 |
110 |
2 |
|
QY18-84/4-7.5 |
7.5 |
18 |
84 |
2.5 |
|
QY10-135/5-9.2 |
9.2 |
10 |
135 |
2 |
|
QY18-110/5-9.2 |
9.2 |
18 |
110 |
2.5 |
|
QY10-160/6-11 |
11 |
10 |
160 |
2 |
|
QY18-126/6-11 |
11 |
18 |
126 |
2.5 |
|
QY10-220/8-15 |
15 |
10 |
220 |
2 |
|
QY18-170/8-15 |
15 |
18 |
170 |
2.5 |
The die casting process involves the use of a furnace, metal, die casting machine, and die.
The metal, typically a non-ferrous alloy such as aluminum, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting.
The castings that are created in this process can vary greatly in size and weight, ranging from a couple ounces to 100 pounds. One common application of die cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.
Metal housings for a variety of appliances and equipment are often die cast.
Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Other common die cast parts include propellers, gears, bushings, pumps, and valves.
Die Casting Cnc,Cnc Die Casting,Cnc Lathe Machining,Aluminum Die Casting
Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.sunleeelectric.com