• Model NO.: WY-1000
  • Working: High Speed Mixer
  • Application: Liquid with Suspended Solids, Viscous Fluid, Liquid
  • Layout Type: Verticle
  • Additional Capabilities: Milling
  • Condition: New
  • Mixing Speed Option 2: 8-140rpm
  • Speed Option 4: 200-1000rpm
  • Origin: Wenzhou China
  • Mixer Type: Agitator
  • Stirring Type: Spiral
  • Application Area: Metallurgy&Mineral
  • Mixing Drum Shape: Disc
  • Operating type: Cycle Operating
  • Mixing Speed Option 1: Fixed Speed Such 36rpm 60rpm, 110rpm
  • Mixing Seed Option 3: 40-200rpm
  • Specification: CE ISO
Stainless steel steam heating stirring pot
1. Made of stainless steel
2. Mixing milk, juice, or any other viscous liquid
3. Customized mixing tank capacity

Stirring pot mainly made of stainless steel, used for mixing different liquid together.
Also, you can use this mixing tanks to mix liquid and power to make a mixture.
Stirring pots can be with different mixing speed. Such as 36rpm, 60rpm fixed mixing speed. But due to some production reqeust, you may need the mixing tanks with variable speed, such as 8 to 140rpm, 40 to 200rpm mixing speed, or 200 to 1000 rpm mixing speed. In special reqeust, we can use VFD to meet your special mixing speed request.

Wenzhou wanyuan food machinery factory mainly produce stainless steel stirring pots for milk, juice, beverage, cosmetic, detergent as well as chemical product.

Our stirring pot capacity can be 50L, 200L, 500L, 2000L or any other capacity you need.
 volume (L) Dimension
(D× h ) (mm)		 Total height (mm)  Diameter Of inlet
& outlet 		 Heat preservation layer (mm) 
500 840 × 1000 2250 38 60 
600 920 × 1000 2300 38 60

 
700 990 × 1000 2300 38 60
800 950 × 1220 2500 38 60
900 1010 × 1220 2500 38 60
1000 1060 × 1220 2550 51 60
1500 1160 × 1500 2850 51 60
2000 1340 × 1500 2900 51 60
3000 1410 × 2000 3400 51 60
4000 1620 × 2000 3450 51 60
5000 1810 × 2000 3500 51 60

Chromium Carbide Overlay Wear Plate

Chrome Carbide Overlay Plate consists of a mild steel base plate onto which a highly abrasive resistant welded overlay is deposited using an open arc or submerged arc process. Plate sizes typically range from 3/8″ to 1-1/2″ in thickness; widths vary from 4′ to 8′ and lengths from 8′ to 20′. The overlay deposit is either one or two layers, measuring 1/4″ or 3/8″ thick. Bead widths vary according to the method of manufacture but typically measure about 1-1/2″ wide and are randomly check cracked. Check cracking occurs as a natural phenomenon during welding and is controlled by the chemical composition of the overlay or by cooling methods.

The finished plates can be formed and fabricated. Holes can be cut with either plasma or laser cutting machine.

ADVANTAGES
· Superior abrasion/impact resistant
· Outlasts AR steels by an average of 4 to 6 times
· Abrasion resistant properties up to 2012°F (1100°C).
· Weld overlay can be applied to two sides for added strength and durability
· Many thickness combinations
· Can be cut, formed and welded
· Pipe fabricated 2″ ID and over
· Low maintenance cost and easy installation.

Chromium Carbide Overlay Wear Plate,Hardfacing Wear Plate,Chrome Carbide Overlay Plate,Anti Strong Impact Plate

SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com