An armored command vehicle is a type of military vehicle that is commonly used in combat operations. There are mainly two modes. One is tracked, and the other is wheeled. No matter which kind can play a good military command role.
With the development of science and technology, armored command vehicles have also been correspondingly improved. After improvement, applicability has obviously improved. The most important manifestation is in the following three aspects:
In the first aspect, the improved communication functions of the armored command vehicle have been improved and the means of communication have increased significantly. As there is a certain difference between the armored command vehicle and other command vehicles, it is this special purpose that has higher requirements for the armored command vehicle. Armored command vehicles often have poor access to the environment. In order to be on the safe side, a variety of communication networks such as radio stations and field-limited communication equipment should be installed on armored command vehicles to meet the requirements of harsh environments and ensure the communication of armored command vehicles. Features. After perfecting and developing, the satisfaction of communication means naturally improves the communication function of the armored command vehicle. No matter how bad the environment is, it can complete communication and transfer information out.
In the second aspect, the widening of the observation horizon can satisfy the commander’s need to observe the battlefield in all directions and ensure that commanders have full knowledge of the situation on the site. Army combat itself is an overall event. Knowing the specific situation ahead can only make appropriate choices to complete the command.
In the third aspect, the interior environment of the command vehicle has been improved. In order to provide commanders with a more comfortable environment to meet the demands of long-term command, it is necessary to improve the environment of the armored command vehicle . Under the conditions of the winter and summer heat, it is not conducive to in-vehicle operations. By installing a heating and cooling system in the vehicle, the interior environment of the vehicle is significantly improved.
The development of science and technology is to use it to change people's lives and work environment. The science and technology in the armored command vehicle is a good example of this, and the armored command car is more suitable for combat command.
It can be eliminated electromagnetic radiation (induction) Impact on people and animals who are nearby the overhead line.
Being equipped with special installation tools with the principle is similar to that of clothe zipper, it can be installed without shut down the power (the voltage is 10kV or below). The operator can install up to 80 meters of overhead line by standing on one fixed position, the installation speed can be reached as high as 20 meters/5 minutes if two people working together in a team.
The sag of overhead line being equipped with SINOFUJI Overhead Line Cover will not exceed the technical requirements, so there is no need to replace any equipment such as braces and clamps.
Excellent weather resistance and insulation, anti-creep, UV resistance, flame retardant, good wear resistance, the lifetime can be guaranteed for ten years.
National Patent Certificate for SINOFUJI Overhead Line Cover
Application Demonstration (1) of SINOFUJI Overhead Line Cover
Eliminate the danger due to insufficient safety distance between the 4-circuit 10kV line and the overpass bridge
Eliminate Potential Danger of Plants to Overhead Line
10KV Overhead Line Cover can be installed without cutting the power supply.
Eliminate the danger due to insufficient safety distance between the 10kV line and the Residential buildings.
Application Demonstration (3) of SINOFUJI Overhead Line Cover
After the power supply is shut down, the overhead line cover is installed for 35kV overhead line at fixed point.
Application Demonstration (4) of SINOFUJI Overhead Line Cover
While HB1522 Irradiation crosslinking silicone rubber self-melting tape is adopted to wrap the various equipment contacts, at the same time, the SINOFUJI overhead line cover is installed to bare wire with its voltage 10kv or below for Insulation Upgrading Project of Distribution Transformer.
Application Demonstration (5) of SINOFUJI Overhead Line Cover
While HB1522 Irradiation crosslinking silicone rubber self-melting tape is adopted to jumpers and its tension clamps, at the same time, the SINOFUJI overhead line cover is installed to bare wire with its voltage 10kv or below, Thus the comprehensive insulation protection scheme can be achieved, mainly for the area where electric poles and electric towers are located.
Application Demonstration (6) of SINOFUJI Overhead Line Cover
HB1571 SINOFUJI Overhead line Cover is a firstly
made domestic production aiming at construction of China high-speed railway. The new invention had been obtained national patent.
In the application of the 27.5kV power supply network of the high-speed railway, it prevents the occurrence of high-speed rail outage accidents caused by open circuit trips with interfering objects.
Application Demonstration (7) of SINOFUJI Overhead Line Cover
The 35kV overhead line of the outlet side of substation is installed with SINOFUJI Overhead Line Cover.
The10kV overhead line of the outlet side of substation is installed with SINOFUJI Overhead Line Cover.
Application Demonstration (8) of SINOFUJI Overhead Line Cover
While HB1522 Irradiation crosslinking silicone rubber self-melting tape is adapted to circuit breaker contacts, at the same time, the SINOFUJI overhead line cover is installed to 10kv bare wire, thus the comprehensive insulation protection scheme of bus line of 10KV side of substation is achieved.
Application Demonstration (9) of SINOFUJI Overhead Line Cover
The SINOFUJI Overhead Line Cover is used on the jumper of high-voltage transmission line to prevent wind deviation, bird damage, moisture, and salt spray from causing flashover trips and other accidents.
Application Demonstration (10) of SINOFUJI Overhead Line Cover
The 110kV HV overhead line is installed with SINOFUJI Overhead Line Cover.
Application Demonstration (11) of SINOFUJI Overhead Line Cover
Together with our self made tape, SINOFUJI Overhead Line Cover is applied to the suspension insulator of 110~220 kV line, which can increase the Creepage Distance giving consideration to Anti-pollution flashover and bird-prevention.
Application Demonstration (12) of SINOFUJI Overhead Line Cover
The 220kV HV overhead line is installed with SINOFUJI Overhead Line Cover.
Silicon Rubber Overhead Line Cover,Waterproof And Insulation Sheath,Overhead Line Cover,Bushing Cover For Overhead Line
ShenZhen FUJI Electric Material Co., Ltd , https://www.sinofuji.com